Proto 3/4″ Drive Retaining Ring 1-5/8″ GRV
Additional Canadian Tariff of 25 %
| Type | Retaining Ring | Drive | 3/4″ |
| Thickness | 3/16″ | Diameter | 1 13/16″ |
| Groove Diameter | 1 5/8″ | Model No | JRR07526 |
Product Features
| Remarks | • Retaining rings are used to help secure sockets onto drive tools. • They are not intended to bear any load. • The rotational forces are between the drive tool and the socket. • The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced. • Drive tool and socket should line up when in use and should not pinch the crush gauge. • Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced. • One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking. • Part numbers are embossed on the rings near the point at which the pin and ring meet. | Country of Origin | USA |
Shipping Info
Package Length
2.00000
Package Width
2.00000
Package Height
.20000
Package Weight
0.01
Item successfully added to your cart
Items successfully added to your cart
Added to
Go to My Lists
Select List
Change Quantity?